Qatar Shell launched a project tbuild and operate a world
scale Gas tLiquids (GTL) facility at Ras Laffan Industrial City
under an agreement with the state of Qatar. A diversified use of
natural gas is emerging, adding a new dimension ttraditional uses of
gas by converting gas into, amongst other products, a high quality
transportation fuel virtually free of sulphur and aromatics.
Qatar, with one of the largest reservoirs of gas, has the stated aim
tbe the GTL capital of the world.
Brunel Energy (a division of Brunel International NV Netherlands)
provides specialists, engineers and other professionals for offshore
and onshore engineering, construction, operations and other logistic
support activities.
OUR CLIENT SHELL IS NOW INVITING APPLICATIONS FOR OPERATORS &
TECHNICIANS MULTIPLE POSITIONS TBUILD AND OPERATE THIS WORLD SCALE
GTL PLANT.
A. OPERATORS
Proven track record in the position of Field Operator, backed up by
working experience in any of the following operations:
1. FIELD OPERATORS/ SR. OPERATORS FEEDGAS PREPARATION (FGP)
Minimum 5 years Operational experience preferably in gas plants, or in
refineries including working with contractors during, (pre)
commissioning and start-up is preferable.
Offshore gas or Oil production unit
Onshore gas or Oil production unit
Gas Treatment plant, with if possible experience in sour gas
treatment and sulphur removal
Refinery gas plants
2. FIELD OPERATORS/ SR. OPERATORS AIR SEPERATION UNIT (ASU)
Minimum 5 years Operational experience preferably in Air Separation
Unit, air compressions, liquefied oxygen, or in Utility operations or
in gas plants, refineries or chemical plants including working with
contractors during (pre) commissioning and start-up is preferable.
Air Separation Unit, air compressor. Liquid oxygen
Any other utilities operations (Steam & Power)
Process Plant (Refinery gas plant, petrochemicals)
B. PANEL OPERATOR (ASU & FGP)
Proven track record in the position of Field Operator, backed up by
working experience in any of the following operations:
Minimum 8 years Operational experience in Air Separation Unit,
air compressions, Liquefied oxygen, or in Utility operations or in
gas plants, refineries or chemical plant including working with
contractors during, (pre) commissioning and start-up is preferable.
Responsible for all aspects of operating the panel for that
area and directing a team of operators tensure the clean, safe,
effective and optimal operation of the designated plant and equipment.
Operation of control panel in a clean, safe, effective and optimal way
during mode change, start up and shut down
1. OPERATOR – FEED GAS PREPARATION (FGP) PANEL
Offshore production unit
Onshore production unit
Gas Treatment plant, with if possible experience in sour gas treatment
and sulphur removal
Refinery gas plants
2. PANEL OPERATOR – AIR SEPERATION UNIT (ASU)
Air Separation Unit, air compressor. Liquid oxygen
Any other utilities operations (steam & Power)
Process Plant (Refinery. Gas plant, petrochemicals)
C. TECHNICIANS
1. ELECTRICAL TECHNICIANS (FIELD, PROTECTION TEST & INSPECTION)
Qualification & Experience:
The candidate should have at least Diploma in Electrical or equivalent
in Electrical with at least 8-10 years either onshore or offshore
facilities of the Oil & Gas Industry. Knowledge & experience
in Electrical Distribution, Electrical Installation, Maintenance
Execution & Electrical Protection, Inspection/ Testing is
essential. Experience in troubleshooting and analysis of equipment
failure is highly desirable.
2. INSTRUMENTATION TECHNICIANS (FIELD, QMI, DCS & IPS)
The candidate should have at least Diploma in Instrumentation or
equivalent in QMI, DCS & IPS with at least 8-10 years either onshore
or offshore facilities of the Oil & Gas Industry. Knowledge &
experience Instrumentation Distributed Control Systems, PLCs,
Field instrument Installation, Maintenance Execution &
Instrumented Protective Devices Inspection & Testing is required
& troubleshooting and analysis of equipment failure is highly desirable.
3. ROTATING EQUIPMENT TECHNICIANS
Qualification & Experience: The candidate should have at least
Diploma in Mechanical with at least 8-10 years maintenance
experience of the Oil & Gas Industry for Rotating Equipment,
Condition Monitoring, & inspection/Testing is required.
Knowledge and Experience in Maintenance execution of Mechanical
Rotating Equipment, Condition Monitoring & Inspection/Testing is
required & troubleshooting and analysis of equipment failure is
highly desirable.
4. MECHANICAL FIELD TECHNICIANS
Qualification & Experience: The candidate should have at least
Diploma in Mechanical with at least 8-10 years maintenance experience
within Oil & Gas Industry. Experience in Static Equipment, Rotating
Equipment, Mechanical Protection devices, Inspection /Testing is
required. Experience in troubleshooting and analysis of equipment
failure is highly desirable.
5. LABORATORY TECHNICIANS
Qualification & Experience: The candidate should be a graduate in
Chemistry with at least 8-10 years either onshore or offshore
facilities of the Oil & Gas Industry. Working experience &
Knowledge of laboratory equipments like ICP, IC, GC=ms, 2D-GC & XRF,
analyzer is required. Knowledge of LIMS & QMS is highly desirable.
Individuals are expected of tdemonstrate ability twork within a team
of operators / technicians in a multi-cultural environment and must be
able tcommunicate effectively with all levels of the organization.
Fluency in English both in writing and verbal is mandatory for all the
positions.
Qualified and interested candidates are invited tsend their detailed
resume gtl@bruneluae. com
Please mention position applied for in the subject line of your email.
http://www.brunelenergy. net
All About Jobs 
KAZI ZAKIRUDDIN AHMAD said,
November 30, 2007 @ 3:29 am
Dear Sir,
I am interested and want to apply for the position ” PANEL OPERATOR-ASU”. I have an 9 yrs exp in ASU and Utility operation. How can i apply.
Pls suggest me asap.
Thanking you,
regards,
Kazi zakiruddin ahmad
+919925206264
Om Prakash Dhusia said,
December 4, 2007 @ 8:28 am
I am Diploma in Mech. Engg with First Class Boiler Competency Cetificate,having worked in India and abroad, of 48 years of age, presently working at Sharjah Electricity and Water Authority as Senior Unit Operator for the last six years.
I want to apply for the post of Field Operators/Sr. Opertors Utility(steam and power).
regan said,
April 7, 2008 @ 1:01 pm
I have total 5 years experience as a Instrument Engineer from 2002 to till date. Now I am working in “Alghanim International General & Trading co” (15 june 2005 to till date) . I hope you will consider my candidature and provide me an opportunity to work in your esteemed organization, if I could get a chance I will take the work with great sense of responsibility and I assure of my best services, dedication and commitment for the entire growth of the organization and I will make a positive contribution in the position you offer.
You can contact me at any time on the following telephone number.
00965- 7241079 (Kuwait)
Email: reganj40@yahoo.com
Murli Mamtani said,
July 9, 2008 @ 2:52 pm
I have more tha 30 years experience for refinery and Hydrogen plants operation and commissioning.
Since last 12 years I am working as a sr manager commissioning and responsible for activities of Hydrogen and ASU plants
Murli Mamtani said,
July 9, 2008 @ 2:53 pm
I want ot apply for manager commissioning for Qatar GTL project
L.Ravi said,
July 18, 2008 @ 5:40 pm
Dear Sir,
I am interested and want to apply for the position ” PANEL OPERATOR-ASU”. I have an 10 yrs exp in ASU and Utility operation. How can i apply.
Pls suggest me asap.
Thanking you,
regards,
L.Ravi
hitendra patel said,
July 21, 2008 @ 12:24 pm
BIO – DATA
HITANDRA V. PATEL
AT. & PO. LATIPURA,
SUTHAR STREET. TA PADRA. DI. VADODARA
PIN: 391440
PHONE: 02662-225919, +919723094124
DATE:01/06/2008
TO
PERSSONAL MANAGER SIR (P&IR),
SUBJECT: APPLICATION FOR THE POST OF “UTILITY OPERATOR”
NAME : PATEL HITENDRAKUMAR VINODCHANDRA
ADDRESS: AS ABOVE
DATE OF BIRTH: 25/03/1972
RELIGION: HINDU
NATIONALITY: INDIAN
MARITAL STATUS: MARRIED
E MAIL EDDRESS : hitesh350@yahoo.com
QUALIFICATION :
1. I HAVE PASSED S.S.C. EXAMINATION IN MARCH 1988 WITH FIRST CLASS WITH 61 %
2. I HAVE TRADE TRAINING (APPRENTICES SHIP) IN LARSON & TUBRO LIMITED AT. HAZIRA ( SURAT ) FORM: 23/03/1989
TO: 20/01/1993
MAINTENANCE OF MACHINE TOOLS & ENGINEERING DRAWING
TRAINING COMPLTED (FOUR YEAR).
EXPERIENCE :
1. ELECCTRO PRINTCRS PVT. LTD. AT. NANDESARI ( BARODA )
DATE: 08/07/1993 TO DATE: 22/04/1995(1 YEAR & 9 MONTH )
MAINTENANCE ASSISTANT FITTER & D. G. SET OPERATOR
2. J C T ELECTRONICS LTD. :AT KARKHADI ( BARODA )
DATE: 22/05/1995 TO DATE : 08/08/2003 ( 8 YEAR ,3 MONTH )
“SR. TECHNICIAN” UTILITY OPERATOR & MAINTENANCE. {PROJECT STAGE WORKING}
3. AMOLI ORGANICS PVT. LTD. : AT. LUNA (PADRA -(BARODA ) )
DATE : 06/02/2006 TO DATE :24/09/2006
UTILITY OPERATOR.
4. PRESENT SINCE TODAY WORKING : GULBRANDSEN CHEMICALS PVT. LTD.
DATE : 27/09/2008 TO CONTINUE WORKING
“UTILITY OPERATOR” IN UTILITY DEPARTMENT EXPERIENCE IN OPERATION & MAINTENANCE WORKING PROJECT STAGE EXPERIENCE.
WORKING EXPERIENCE :
• AIR COMPRESSOR : 1250 NM³/Hr
• AIR DRYER : 2500 NM³/Hr
• NITROGEN PLANT : 60 NM³/Hr
• CHILLER PLANT : 700 TONE( VOLTAS & THERMAX)
• A .H.U. : AIR HANDLING UNITS ( HEPA & MICRO ‘V’ FILTER DUST COUNT AREA – HOT & CHILD WATER ).
• D.G. SET : 1750 KVA(DETROIT) & TFH : 6 LACS Kcal CAPICITY
• WATER TREATMENT PLANT: R.O. PLANT,SOFT WATER & D.M. WATER TREATMENT .
• COOLING TOWER / PUMP/ GEAR BOX ETC. EQUIPMENT & NON I.B.R. BOILER = 800KGS
• JOB OPERATION & MAINTENANCE : UTILITY DEPARTMENT.
• ERRECTION PROJECT STAGE WORK EXPERIENCE : UTILITY DEPARTMENT.
TOTAL EXPERIENCE : 13 YEARS RUNNING
TOUR FAITHFULLY
m mohamed elias said,
July 22, 2008 @ 8:53 am
i am working in Dubai electricity and water authority as control room operator for 3 X 250 MW GE9001FA Gas turbine plant. i am willing to in your organizations
.
How can i apply.
Thanking you,
regards,
M Mohamed Elias
+971558480246
+971504780325
tarek ageel said,
August 13, 2008 @ 10:40 am
I am tarek aqeel i am 29 years old ihave intermediate diploma in oil gas industries i am working as panel operator in poly ethylene plant in ras lanuf oil and gas processing company uesing DCS system for 10 years and i worked as field operators. i like work with your company as field or panel operator so how can i send my CV .
TANKS AND BEST REGARDS,,,,,TAREK
tarek ageel said,
August 13, 2008 @ 10:41 am
I am tarek aqeel iam 29 years old ihave intermediate diploma in oil gas industries iam working as panel operator in poly ethylene plant in ras lanuf oil and gas processing company uesing DCS system for 10 years . i like work with your company as field or panel operator so how can i send my CV .
TANKS AND BEST REGARDS,,,,,TAREK
Ahmed Majdob said,
August 20, 2008 @ 11:25 am
Dear Sir/ Madam:
Vacancy for Rotating Equipment Technician
I have pleasure of applying for the position for Rotating Equipment Technician in response to your advertisement. I am keenly interested in this position as the description of the role matches my own skills and experiences.
I would welcome the opportunity to travel and would be willing to undertake any further training you may feel necessary.
I very much look forward to hearing from you in order to discuss my application further.
Yours Sincerely,
Ahmed Majdob.
tarek ageel said,
September 7, 2008 @ 10:22 pm
iam tarek ageel from libya iam 29 years old iam working as panel operator in rasco company in main control room uesing DCS system.I graduated from petrolum institute in tripoli , i have many certeficates about oil and gas i went to SCOTLAND IN UK for training about process. i like work with you as panel or field operator .
THANKS AND BEST REGARDS
ELMELIANI said,
September 15, 2008 @ 11:28 pm
i looking for a job of laboratory oil and gas
Rehan said,
September 18, 2008 @ 4:56 pm
I want to apply as a plant supervisor.Ihave 17 years experience in Air separation plant. I am working as a plant supervisor. I have also experience in different plants N20 plant, CO2 plant,C2H2 plant.I have also experience in GOX supply to Steel Factory.I have experience in plant maintenance.I have experience in plant commissioning.I have experience in DCS & PLC.Mostly I worked on Air product plants.
ANTONY GENIT REGIN said,
September 20, 2008 @ 2:12 pm
DEAR SIR
I AM A CANDIDATE OF DIPLOMA IN MECHANICAL ENGINEERING HAVING EXPERIENCE IN OFFSHORE GAS FIELDS IN INDIA ANA OIL FIELD IN SUDAN.
I WOULD LIKE TO APPLY FOR THE POST OF FIELD OPERATOR (FGP). I AM HOLDING SIX YEARS OF SOLID EXPERIENCE.
RAJESH KUMAR YADAV said,
September 23, 2008 @ 3:35 pm
INSTRUMENT TECHNICIAN
hamni said,
October 5, 2008 @ 10:36 am
18 years as plant operator in sonatrach algeria
benladghem sid ahmed said,
October 7, 2008 @ 1:00 pm
I WANT TO APPLY FOR SENIOR MECHANICAL TECHNICIAN IN OIL AND GAS PLANT AND SPECILISED IN THE MAINTENANCE OF GAS CENTRIFUGAL COMPRESSORS NUOVO PIGNONE
selvakumar said,
October 19, 2008 @ 12:18 pm
Dear sir,
Am a diploma holder , have 13 years exp in automobil fild presently working in dubai as a workshop in chareg like to apply as a workshop in charge. suggest me how to apply.
Thanking you
selva
SURENDRAN KURUPPATH DAMODARAN said,
October 24, 2008 @ 2:40 am
I am a Diploma holder in elect. engg. having worked in india and gulf shipyard(15 years as electrical chargehand) and presently working in drilling RIG since 3 years as rig electrician.
I want to aplly for the post ofELECTRICAL TECHNICIAN. Suggest me more details.
mahida bharat kumar kirit bhai said,
October 24, 2008 @ 4:22 am
i am searching of jobs so that my qualification diploma in chemical engineer and 4years experience in very hazardous plant organic tin compound chemical hadaled and PLC scada panel operating is runing my job.
MOUSTAFA MOHAMMED ABD ELKWI said,
October 29, 2008 @ 3:30 pm
C.V.
Personality
Name : Mustafa Mohamed Abdel Kawiy.
Birth Date : 20/12/1969.
Martial state : Married.
Address : Ruwais,Abu Dhabi,UAE – P.O.Box: 11927
Contact No. : +971 50 7909653
Egypt contact : 0020846711372
Qualification
Diploma Of Technical Industrial Institute (Electrical Branch).
Professional Training
I have got training in
• Steam power plant.
• Industrial security,
• Lubrication,
• Computer courses.
• Safety passport
Professional Experience
From 1/09/2001 till Date.
UAE-Abu Dhabi Oil Refinery at Ruwais (Takreer Co.)
From 1/12/1992 till 1/08/2001.
The Egyptian Mineral & Salts Co Steam Power plant. At Fayoum -Egypt
Duties & Responsibilities:
–Operate safely and efficiently the following equipment and plants: Boilers, Water Dematerializing plant, Spent Caustic Oxidation Unit, Instrument Air Compressors, Nitrogen Generation package (Cryogenic), Seawater system, Closed Circuit Cooling Water system, Fresh water and potable water system, fire water system, Waste Incinerator handling liquid and solid waste, Waste Water Treatment Plant.
–control Room & Field Operation, Identification and Rectification of problems, Taking decisions during emergencies due to upsets in Gas Turbines, Boilers, HRSG, Steam Turbines.
–Keeping the operations at the maximum standards of efficiency with the highest operational and equipment safety.
Managing safe working conditions through safety work permit system to carryout day – to– day plant activities & maintain such documentation generated through the said system.
–Responsible for review of formats & plants manual origination from the diction.
–Controlling & maintaining liquid % air pollutes within the norms.
–Follow-up & documentation of maintenance and other pertinent jobs.
–Logging plant parameters, activities & abnormalities.
–Supervise contract employees during turnarounds and on special project
–Perform minor maintenance activities.
–Be a member of Emergency Response Team and take part in rescue, fire fighting and related training.
–Take part in Job Safety Analysis, safety audits, maintenance planning, and toolbox discussions.
–Troubleshoot plant problems and initiate remedial actions
Details of work experience & commissioning experience:
Participated in the commissioning of various utility sections
Major activities are and carried out are
*Hydro testing of gas/steam /liquid handling pipes lines and also high pressure & medium pressure boilers:
*Purging and cardboard blasting of various types os pipelines.
*Alkali boil out and acid clearing operation in boilers.
*Steam blowing of high/medium /low pressure steam lines.
*Refractory dry out operation in boiler furnaces.
*On line testing of high-pressure safety valve.
*Over speed trip checks of turbines etc.
STARTUP AND SHUTDOWN:
Having adequate knowledge about the startup & shutdown procedures of following equipment.
*Back pressure and condensing type steam turbines.
*Centrifugal and reciprocating type compressors handling air and screw type compressors handling *Unit operations like clarifier, thickeners, dryers, absorbers and also cold box.
*Single/multistage centrifugal pumps
*Gas turbines and steam generating units.
*Chlorination system and water treatment process.
*Diesel generators.
EQUIPMENTS AND FIELD EXPOSURE
•Two boiler units (high pressure) with capacity,35 ton/hr&65bar
•Two steam turbine units with 10050 r.p.m.
•Two turbogenarator units with 5000K.V. as a rated power and
0.85power factor
•Two Diesel generator units with 800 KVA as a rated power
50Hz. 0.85 p.f.
•Medium voltage switch rear room (11 KV)
•Control Room
•Motor control center (Mcc) for operating the power plant
auxiliaries
•Step – down power transformers plant(11000 /400v)
•Uninterruptible power supply (UPS) unit for operating of
instrumentation, charging of batteries banks, and control
contactors.
•Batteries Room.
•Water cooling tower for cooling condensers and same
processes.
•Water treatment plant.
Pretreatment of water plant.
Water treatment (Demineralization) plant.
Reverse osmosis (R.O.) plant.
•Fresh cooling water system.
•Gas system (H.P., M.P., L.P.).
•Nitrogen plant.
•Air compressor different capacity.
•Air driers.
BOILERS:
Capacity: 2*100T/hr, 108Ksc, 5150C.
2*35T/hr, 65Kg/cm2, 4000C (Bono Italian)
Make: Mitsui Engg. And Ship building company Ltd. Japan.
Type: Bi-drum, multi fuel (NG, LSHS), water tube boiler.
3*75 T/Hrs, 380 C, P/43Kg/cm, (CCT ITALI)
4*30 T/Hrs, 370C, P/18Kg/cm, (Mitsubishi, Japan)
WATER TREATMENT PLANT:
Capacity: 2*1200m3/hr, Make:Geo miller Calcutta.
Two carbon filters+ two mixed beds
DM pant: 4*75M3/hr, 3*135M3/hr Process cpndensate recovery,
3*240M3/hr Turbine condensate recovery.
Make: Thermax, pune.
COOLING TOWERS:
Capacity: 10cells-each 3600M3/hr. circulation rate.
Make: Paharpur, Calcutta.
Type: Open circulation, Induced draft, cross flow tower.
Chemical treatment by Aquazur, pune.
NITROGEN PLANT:
Capacity: 420Nm3/hr in GAN & 40Nm3/hr in LIN/GAN mode.
600Nm3/hr in GAN only mode.
Make: Air Products, U.K.
Type:Air separation by distillation phenomenon.
Capacity: 750 LIN&3Nm3 GAN
Type: Linde Germany
INSTRUMENT AIR:
Capacity: 2*2200Nm3/hr.
Make: Elliot compressors, USA.
Type: Centrifugal.
Five compressors DELFEL DAMAGE,
Capacity 5000Nm3/Hrs.
Four air driers capacity 5000Nm3/Hrs, dew point -20.
STEAM TURBINES:
Two steam generators turbines, 5000 KVA
Different types and capacities of steam turbine pumps .
jimmy paul peter said,
October 31, 2008 @ 7:26 am
i am jimmy appling for the post for the instrumentation senior tech. currently i am working for the CHIYODA TECHNIP JOINT VENTURE QATAR GAS -II PROJECT as the loop, function & commissioning support supervisor. i have 8- years exp in maintenance & project as well as offshore platform oil & gas field
Ramakrishnan said,
November 4, 2008 @ 10:02 am
Dear sir,
I am a graduate in chemistry. I have Six years experience in the lubricating oil field and also I have handling many petroleum instruments like ICP, FTIR, GC, MRV, and CCS etc. If I am select, I will do best my level. I am applying for the post of chemist in good concern. I have attached my resume for your reference.
I am looking for your favorable reply
Thanking you
Yours truly,
P.Ramakrishnan
ramprasath said,
November 26, 2008 @ 5:08 pm
RESUME
C.RAMPRASATH
E-mail : rprasath1984@yahoo.co.in
Mobile NO: 00965 – 6704332
PERSONAL PROFILE
Position Applied for : Instrument Technician
Name : C.RAMPRASATH
Father Name : V. Chokkalingam
Age/ Date of Birth : 24 years / 13.06.1984
Nationality : Indian
Marital status : single
Languages Proficiency : English, Tamil
Permanent Address : Neduvasal (post),
Alangudi (Taulk),
Pudukkottai (Dist),
Pin – 622304.
Contact Number : 91-4373-272270.
PASSPORT DETAILS
Passport No : F5934368
Date / Place of issue : 29.12.2005 / Thiruchirappalli
Date of Expiry : 28.12.2015
EDUCATIONAL DETAILS
Educational Qualification : H.Sc. (Higher Secondary)
Technical Qualification : Diploma in Electronics & Communication Engineering.
Computer Proficiency : Knowledge in Ms Excel & Word
WORKING EXPERIENCE
Having Experience in Refinery, Petrochemical and Power plant.
Employer : AN Instrument (p) Ltd. Chennai.
Position : Instrument Technician
Duration : May 2004 to July 2006.
Client : Chennai Petroleum Corporation Limited,
(Formaly Madras Refinery Ltd), Chennai.
Employer : IMCO, Kuwait.
Position : Instrument Technician
Duration : August 2006 to Till Date.
Client : Kuwait National Petroleum Co. Kuwait.
NATURE OF JOB
• Familiar with Area classifications and P & ID Symbols
• Study and interprets the engineering documents to subordinates such as P &ID, Loop wiring diagrams, Hook up drawings, Instrument specification sheets, Local and control room panel layout drawing and Cable layout drawing & cable index.
• Fault finding and trouble shooting of Relay logic diagrams, Sequence diagrams and Cause & effect diagrams,
• Carrying out daily routine maintenance, preventive and corrective maintenance, installation, commissioning & calibration of instruments.
• Breakdown and major overhaul shutdown jobs and start-up activities.
• Developing maintenance schedules for programmed plant shutdowns.
• Preventive and corrective maintenance including calibration, fault finding and trouble shooting of various pneumatic and electronic field namely, pressure, flow, level, temperature
• Sensors, Transmitters, Indicators, Controllers, Converters, Control Valves, Switches, Relays of different manufactures namely,
• Rosemount, Foxboro, Honeywell, Masoneilan, Bailey, ABB, Gulde, Yokogawa, Magnetrol, Delta, Static ‘O’ Ring, etc,
• Through knowledge in implementation of interlock system of Pumps, Heaters, Centrifugal & Reciprocating Compressors and Reformers
• Job responsible for start up, s/d maintenance, trouble shooting, loop checking of all instruments and fault finding, commissioning of new systems
• Understanding and trouble shooting of loop diagram, hook up drawings instrument specification sheets, relay logic diagram, sequence diagram, cause and effect diagram, local and control room panel layout, drawings, cable layout drawing and index P&ID.
• Servicing, Overhauling and calibration of all types of control valve and shut off valves.
SYSTEM HANDLED
• Distributed control system of Yokogawa Centum CS 3000.
• Distributed Control System of Honeywell TDC 3000.
• Emergency Shutdown System of Honeywell FSC.
• Programmable Logic Control System Bonaraugust.
PROCESS UNITS EXPOSURE
Crude Distillation Unit, Vacuum Unit, Reduced Crude Desulphurization Unit, Hydrogen Production Unit, and Flare Unit.
ROTATING EQUIPMENTS HANDLED
Instrument air compressor, all types of Pumps, Steam turbine, Boiler.
PROJECT EXPERIENCE
• Bench Calibration of Instruments.
• Online Calibration of Instruments.
• Loop Checking of Instruments.
• Pre Commissioning and Commissioning Activities.
(C.RAM PRASATH).
n.arunachalam said,
December 23, 2008 @ 4:01 am
I am Diploma in Elec. Engg with First Class,Electrical supervisor Competency Cetificate,having worked in India and abroad, of 12+ years of Experience , presently working at Kuwait Ministry of Energy( Electricity and Water ) as Electrical supervisor for the last seven years.
I want to apply for the post of supervisor/Technician.
Thanking you.
N.Arunachalam.
00-965 67046987
R.NATARAJAN said,
December 29, 2008 @ 6:39 am
OPERATOR – FEED GAS PREPARATION (FGP) PANEL
Total Experience both in OIL AND GAS and PETROCHEM PLANT as Senior Supervisor/DCS panel 21 years (CENTUM 3000 YOKOGAWA SYSTEM)
Working Experience Unit:
Gas Sweetening (Treating) : MDEA Technology
Gas Dehydration unit (Molecular Sieves)
Gas Chilling & Ethane Recovery Unit (Cryogenic Cold box)
Propane Refrigeration Unit.
Condensate stabilization unit..
OFF-GAS compressor
NGL FRACTIONATION (Propane and Butane)
Sunder K Mirchandani said,
January 24, 2009 @ 4:25 am
Dear Sir,
I am a consultant in cryogenic plants and have a long experience in operation and maintenance of Tonnage Oxygen Plants for Petrochemicals and steel Industries currently I am working on 2 Projects in Iran. I am keen to Join Shell Qatar at a very short notice. My e mail and my web site details are given for your kind reference please.
Looking forward to work for your esteemed Organization.
Sincerely
for Break Air Solutions
S K Mirchandani
Cryogenic ASU Consultant
Pune, India
raja said,
January 27, 2009 @ 12:31 pm
how to sent cv to u
RAKESH CHANDRA KHANNA said,
April 2, 2009 @ 7:54 am
Dear sir
I was given the written test & medical in DELHI for the ASU FIELD OPERATOR
but I do not receive any response from your side as one year has been gone.
Prasad said,
October 7, 2009 @ 5:21 am
Dear sir,
Iam prasad at present iam working in switch gear field for last 11 years presently as a production supervisor for last 2years, plse tel me how to send my cv
mohammad naushad alam said,
October 21, 2009 @ 2:30 pm
iIHave total 8 years experience as an Instrument technician from 2002 to till date. Now I am working in “Saudi international petrochemical company ltd (sipchem)” (15 October 2007 to till date). As a instrument lead technician in JAC PROJECT. I hope you will consider my candidature and provide me an opportunity to work in your esteemed organization, if I could get a chance I will take the work with great sense of responsibility and I assure of my best services, dedication and commitment for the entire growth of the organization and I will make a positive contribution in the position you offer.
You can contact me at any time on the following telephone number
00966 547658835
Mail id: saznau_nausaz@yahoo.co.in
Thanks & regards
Mohammad Naushad
Mohammad Hashim ali said,
October 22, 2009 @ 7:51 am
I have total 5 years experience as a Sr. Electrical Technician from 2004 to till date. Now I am working in “Saudi International petrochemical company Ltd” (12 december 2007 to till date) . I hope you will consider my candidature and provide me an opportunity to work in your esteemed organization, if I could get a chance I will take the work with great sense of responsibility and I assure of my best services, dedication and commitment for the entire growth of the organization and I will make a positive contribution in the position you offer.
You can contact me at any time on the following telephone number.
00966-560621232 ( saudi arabia )
Email: a.hashim39@yahoo.com
ahashim@sipchem.com
Mohammad Hashim ali said,
October 22, 2009 @ 7:52 am
Mohammad Hashim Ali Email : a.hashim39@yahoo.com
: ahashim@sipchem.com
Sub: RESUMME OF ELECTRICAL TECHNICIAN
Permanent Address: Present Address:
Mohalla: Midday Toli Saudi Arabian Kent Co Ltd.
Par Nawada PO Box: 3462
Post: Nawada Al-Khobar-31952
District: Nawada (Bihar) Kingdom of Saudi Arabia.
Pin no: 805110 (India) Contact no: 00966560621232
Contact no: 00919931362655
Professional Objective:
To work in a challenging and growth oriented Environment. Unifying my progress with the team and organization in which I work.
Education Qualification : S.S.L.C Passed
Technical Qualification : Diploma in Electrical Engineering.
Professional Qualification : Good Knowledge of computer likeMSDows/ Excel/Power Point & internet Explorer
Passport Detail:
Passport no : F 4048853
Place of issue : Patna (Bihar)
Date of Expiry : 14th JULY 2015
Main Skill : Electrical & Control System.
Job Description:
Over 5 years Experience in Project / Maintenance, function test and Trouble Shooting Techniques of a variety electrical and Control Systems found in the Refinery, Oil & Gas/ Petrochemical Industries and Power plants and Steel plant.
Professional Goal:
Seeking a Position as Electrical Technician in Saudi international petrochemical company (SIPC) specializing in Maintenance & Construction within a growth-oriented firm (methanol & B.D.O. project) continued last December 2007 till date
Worked in different types of project:
As an Senior Electrical technician Maintenance and Construction in Petrochemical / Oil and Gas separation plant / Fertilizers /Power plants /Water Desalination plants and Fire and Gas system for a period of 5 years
Worked other project with multinational company S.A.Kent co.ltd:
Saudi international petrochemical company (SIPCHEM) Maintenance division Jubail from December 2007 till date.
Sharq Project (SABIC GROUP) as a Senior Electrical Technician from August 2007 to December 2007.
Hadeed Steel Plant (SABIC GROUP) Expansion of conveyer as an Electrical Technician from January 2007 to August 2007.
Work Experience in India:
I.C.B. Company Ltd (ONGC Reliance Hazira India) as an Electrical Technician from 10th December 2004 to 10th December 2006.
Rohini Industrial Electrical Pvt. Ltd as an Electrical technician from September 2004 to December 2004.
Job Responsibilities in sipchem maintenance department as a technician:
Maintenance of I & C SYSTEM
Preventive Maintenance / Repairs and fire & gas system.
Break Down Maintenance
Shutdown Maintenance
Quality Checks for I & C Systems during Erection and Commissioning /Loop checks.
Nature of job:
Trouble shooting of interlocks in blowers, furnaces, pumps, Compressors and plant logics. Loop schematic diagrams.
Wiring and termination of Electrical cables and documentation and Maintenance of records as per ISO standard.
Electrical / JB location Drawings. Exposure to distributed control system.
Experience in troubleshooting and maintenance of all type of field Electrical instruments.
Yearly shutdown maintenance of H.V & L.V, switchgear and MCC panel.
Working experience in PLC field Electrical like limit switches. Cement plant boiler and acids plant unit mainly involved in calibration of electrical as per the petrochemical standard, maintenance and troubleshooting of electrical as well as loop checked and fault finding in the loop. And also involved in electrical modification, logic circuit alarm installation.
Maintenance of switch gears, batteries, chargers and UPS. AC&DC
Ibution panels. Taking reading of power, energy, consumption, and
Oring faults conditions or any alarms.
Actively involved in erection of electrical marshalling panel, barrier panel and control panel shut down cabinets PLC, DCS and wiring of electrical.
Completing the tasks in time as scheduled during the shut down maintenance as well as regular day to day maintenance.
Co-ordinate with the team members as with the engineers and higher officials.
Strictly following the safety rules and regulations whenever carry out any work in the premises.
Preventive maintenance of MCC breakers, protection relays such as 469, 269 etc. taking power consumption. Preventive maintenance of motors, breakers, contactors and motors cubicles. Taking reading of load current of motors. Meggering, winding resistance of motors, check the wiring tighting connections, visual check for any heat traces and flashes. Checking control/power wiring, DCS connection. Checking of remote, local control of motors, checking of RTD connection.
Daily readings of transformer oil temperature, winding temperature, gas pressure Observe any abnormal sounds. Transformer power/load-energy monitoring. Check protective relays .oil leak, oil level and conservator oil levels. Maintenance of NGR.
Periodic and daily maintenance of plant lights, photo control, lighting stribution panels, emergency lights, and aviation lights.
Personal information:
Name : Mohammad Hashim Ali
Father Name : Mohammad Qasimuddin
Date of Birth : 2nd January 1985
Nationality : India
Marital Status : Single
Language Known : English, Hindi, Urdu, Arabic.
Contact no : 00966560621232
E-mail Id : alihashim476@yahoo.com
ahashim@sipchem.com
Date:
Place:
(Mohammad Hashim Ali)
mohammad sarfaraz ali said,
October 22, 2009 @ 8:04 am
I have total 8 years experience as a Instrument Technician from 2000 to till date. Now I am working in Saudi International petrochemical company ltd” (27 march 2008 to till date) . I hope you will consider my candidature and provide me an opportunity to work in your esteemed organization, if I could get a chance I will take the work with great sense of responsibility and I assure of my best services, dedication and commitment for the entire growth of the organization and I will make a positive contribution in the position you offer.
You can contact me at any time on the following telephone number.
00966-559904963
Email: md.sarfrazali@yahoo.com
mali@sipchem.com
mohammad sarfaraz ali said,
October 22, 2009 @ 8:04 am
I have total 8 years experience as a Instrument Technician from 2000 to till date. Now I am working in Saudi International petrochemical company ltd” (27 march 2008 to till date) . I hope you will consider my candidature and provide me an opportunity to work in your esteemed organization, if I could get a chance I will take the work with great sense of responsibility and I assure of my best services, dedication and commitment for the entire growth of the organization and I will make a positive contribution in the position you offer.
You can contact me at any time on the following telephone number.
00966-559904963
Email: md.sarfrazali@yahoo.com
mali@sipchem.com
mohammad sarfaraz ali said,
October 22, 2009 @ 8:05 am
RESUME
MD.SARFARAZ.ALI
Permanent Address:
Madarsa plot barinagar
Telco P.O. telco works
Jamshed pur 831004 Cont. No. ( Saudi )-00966559904963
Jharkhand (India) E-mail md.sarfrazali@yahoo.com
Mobile (+919934173885/+916572280221 ) E-mail mali@sipchem.com
Sub: – Applied post of Instrument Technician
CAREER OBJECTIVE
Having above 8 years experience Petrochemical, Gas, and power plant Pre-Commissioning, Commissioning and Start up supporting activities. Specializing in the field of Trouble shooting, Running, Shutdown and Break down maintenances within a growth oriented firms.
SUMMARY OF PROFILE AND SKILLS
Have a good exposure in On-line/Off-line calibration of Smart and Fieldbus process control instruments.
Calibration, Overhaul and Service of Control valves with its Accessories.
Installation, Setting and Testing of Bently Nevada Vibration Monitoring Systems.
Loop checking, Cause and affect testing, and Functional logic checking of field instruments.
Pre-commissioning, Commissioning and Start up support activities.
Running Maintenance (Preventive and Corrective), Testing and Trouble Shooting of field instruments.
Shutdown and Break down Maintenances.
Burner Management system used for Boilers, heaters and Fire eye Flame scanners
PROFESSIONAL EXPERIENCES
Experience Duration : 27nd March 2008 till continuous
Position :Instrument Maintenance Technician
Company : M/s. S.A.KENTZ CO. LTD., Saudi Arabia.
Organization : M/s. SIPCHEM (Saudi International Petrochemicals), Al-Jubail, Saudi Arabia.
Job Description : Responsible for Running Maintenance (Preventive and Corrective), Shutdown and Break down Maintenance, on line and off line Calibrations of field instruments such as control valves, Smart transmitters, Displacer type level transmitters, Gauges, Local indicators, Controllers and many others. Overhaul/Servicing of control valves and actuators, Testing and Trouble shooting of on plant field instruments, also handled Instrument data bases such as P&ID, ILD, Hook up drawings etc.
Experience Duration 2nd January 2007 to 11th March 2008
Position : Instrument Technician
Company :Tata Power Plant Pvt. Ltd Jamshedpur
Job Description : Coordination of field activities and preparation of pre-loop and final loop folders, Responsible for final loop checking with client, Installation Acceptance Testing and System , Instrument support erection, instrument installation and Termination supervising, Leading of instrument calibrations, Function checking of field instruments as per requirement, Trouble Shooting, Pre-commissioning and Commissioning of fire and gas systems.
Experience Duration : 4th February2006 to 9th November 2006
Position : Instrument technician
Company : M/s Universal Voltas
Organization : M/s. gasco gas plant abu dhabi
Job Description : Involved in loop checking, Calibration of field instruments such as electo-neumatic control valves, Smart transmitters, local indicators and many others. Installation, setting and testing of Bently Nevada 3300 Vibration Monitoring System, start up support and Maintenance.
Experience Duration : 3rd February 2000 to 15th January 2006
Positing : Instrument Maintenance Technician
Company : M/s. Tata power plant Pvt. Ltd Jamshedpur
Job Description : Knowledge of Foundation Fieldbus, Honeywell (TDC 3000X and 3000 Series), Emerson Delta-V 3000, and Triconex ESD system, Testing, I/O modules of marshalling panels for DCS including exposure to PLC ladder logic for Siemens,
TEST EQUPEMENT HANDLED
Scandura Multifunction Microprocessor Calibrator Series B 20.
Druck Pressure/ Temperature Calibrator (DPI605/610/615/650-TC) and Altek Loop/ Temperature Calibrator.
HART 275/375 Field Communicator and S.F.C. Honeywell/ Rosemount/ ABB/ Fuji.
TK3 Wobulator from Bently Nevada.
Wood Ward Peak 150 Communicator (Speed).
Dead weight Tester likes Druck calibrator;
Responsibilities in instrument drawings
Instrument loop drawings (ILD)
Piping and instrument drawings (P&ID)
Instrument process and pneumatic hook up drawing.
Primary and secondary cable termination drawing.
Vendor documents.
PLC, I/O schedules. DCS, functional block, loop relay, logic drawing and system drawing. Instrument data sheet and alarm set point,
Instrument handled
Flow instruments such Mass flow meters ,Turbine flow meters, Rota meters; in addition to conventional type of instruments such as Orifice, Ventury, Annubar and Pitot tube with conventional and smart type DP Transmitters such as Rosemount (2088, 3051 series), Honeywell, Yokogawa, Micromotion, , Foxboro, ABB and Krohne etc.
Pressure instruments like DP transmitters such as Rosemount (2088, 3051 series), Yokogawa, Pressure switch, local controllers of Foxboro and Fisher.
Level instruments such Rosemount (2088, 3051 series) DP type Wet leg and Dry leg, Magnetrol, Radar Ultrasonic, Displacement type ( Top & Side mounted) including Smart type, Diaphragm type.
Different types of Pressure, Temperature and Level gauges.
Capacitance and float operated Level switches of Magnetrol etc.
Conventional type temperature instruments like RTD, Thermocouple, Temperature indicator and Temperature switches etc.
Globe, Butterfly, V-ball type control valves of Masoneilan, Fisher, Valtek flow serve, Orbits, with its accessories such as of, Foxboro, Masoneilan, Fisher, Samson, ABB, Siemens & Metso Controller, I/P Convertor, I/H convertor, F/I Convertor, , Positioner, Solenoid Valves, Isolator.
MOV’s such as Rotork, Limitork, Biffi.
Vibration monitoring system by Bently Nevada (3300&3500 series) and Trend Master 2000
In the field of instrument: installing, testing, calibrating, trouble shooting, and maintaining electronic pneumatic and mechanical equipments, including (plc, dcs, transmitter, level switches, level transmitter, flow transmitter, pressure transmitter, temperature transmitter, , valve, production separator, , transfer pump, oil manifold, blower, gas turbine, compressor, air compressor, shipping pump, gas compressor fire$ gas protection system
Type of sensors like vibration sensor, speed sensor, Displacement sensor, Load sensor. Differential expansion
Power cylinder, Actuators solenoid valve, NRV, Dampers etc.
Well versed in PID work & drawing feedback control, Forward Control, Cascade control & Ratio Control etc
COMPUTERS SKILLS
MS Office.
DTP.
SAP Basis System etc.,
PROFESSIONAL QUALIFICATION
2 years vocational training in Instrument Technician with S.N.T.I. (Shavak Nanavati Technical Institute) TATA STEEL, Jamshedpur since 12.08.1995 to 11.08.1997.
ACADEMIC QUALIFICATION
PLUS TWO (Passed) :Board of Higher Secondary Examination, Bihar (INDIA)
Year of passing : 1999
PERSSONAL PROFILE
Date of Birth : 14/05/1979
Sex : Male.
Martial Status : Single.
Nationality : Indian.
Father’s Name : Md. Mustafa
Religion & caste : Islam
Place of Birth : Jamshedpur.
.Language Known : Urdu, Hindi, English, Arabic
PASSPORT DETAILS
Passport No. : F 0626938
Date of Issue : 29.11.2004
Place of Issue : Ranchi
Date of Expiry : 28.11.2014 (F)
DECLARATION
I hereby declare that all the information given above are true and correct to the best of my knowledge and belief.
Place : Yours faithfully
Date : (Mohammed Sarfraz Ali)
Kartick Chandra Dalapati said,
November 8, 2009 @ 7:46 am
Dear Sir,
I am very interested to join your organisation.
Imanel said,
November 16, 2009 @ 6:49 pm
IMANEL C. REBELLO
Mobile:00-966-543306529
Email: imanel@rediffmail.com
Professional Qualification:
Diploma in Mechanical Engineering
From Dr, T.M. Pai Polytechnic – Manipal;
Year of Passing : June- 2002:
University/Board : Board of Technical Karnataka:
P.U.C : Physics, Chemistry, Maths, Biology:
University : Pre- University Bangalore:
Other training programme : Condition Monitoring (10 Week)
Computer Skills: Microsoft Office, Programming in C-Languages, Auto- Cad 2004 Prism-4;
Membership : A.M.I.E ( Appearing Exam)
Computer Skills
• Microsoft Office, Programming in C-Languages, Auto- Cad 2004;
WORK EXPERIENCE
Total years of experience : 7Years
PERIOD : 26-09-2009 Till date
Employer : Tasnee Petrochemical ( second largest petrochemical in K.S.A)
Location ; Saudi arabia;
Position : Condition Monitoring Technician; PLANT- (P.P, PDH, H.D.P.E, L.D.P.E, ETHEALINE CREAKER) ;
JOB RESPONSIBILITY:
►Downloading M/c Hierarch for Vibration data collection as per schedule ;
► Vibration data collection for non-critical equipment using S.K.F C.M.V.A-60/65/70 Vibration analyzer;
►Vibration data collection for critical equipment from Bentley Nevada Rack ,and Processor;
► Monitoring highly critical equipment from Bentley Nevada system1 online monitoring system;
► Preparation of weekly schedule for critical equipment and monthly schedule for non-critical equipment;
►uploading routine m/c hierarchy vibration data for analysis and diagnosis fault;
► Preparation of weekly schedule for critical equipment and monthly schedule for non-critical equipment;
PERIOD : Feb 2003 30-08-2009
Employer : Ispat Steel;
Location ; India
Position : Condition Monitoring Engineer ;
Duties:
►Vibration data collection & analysis of all rotating equipment include pump, compressor, blower , fan, Motor, Gear box,
► preparation of daily report for the mentioned equipment, with recommendation of equipment having abnormal vibration;
► setting up base line vibration data for condition monitoring and trending ;
►Identifying Type of bearing defect, and its causes and recommending coast improvement to existing process like PM’s optimization , Root Cause analysis Failure mode analysis, implementing R.C.M and T.P.M;
►Temperature survey of static and rotating equipment, using infrared camera;
► Temperature survey of Steel Rolling mill;
► Preparation of condition monitoring schedule and preparation;
► Visual sense fell and inspection of rotary equipment;
► Oil analysis testing of rotary equipment ( TAN Test T.B.N Test, Moisture content test, viscosity test,)
► Balancing of unbalance rotor ;
► Improving O.E.E of the plant;
Period : July2002 to January 2003;
Employer : Titanor component,- Goa;
Position : Maintenance Trainee engineer;
Duties:
►Hand on Experience of Maintenance, Parts Replacement, And Assemble of Electro-chlorinator;
►maintenance of all static equipment in the plant,
►Maintenance of Hydraulic Cylinder, Hydraulic press ( C-type), Power pack:
►Maintenance and operates of Sharing Machine, Capacity ( 6* 16000)
►Estimation of Cathode, And Anode, And Its Repair, Leakage Testing of Sleeve, Flanges, in Pneumatic Leakage Testing M/c,
►Hand of experience of Measurement all Incoming Mechanical Good’s From Vernier Calipers, Micrometer Scew Gauge;
►Supervising all operation in the plant , (Like welding, grinding, polishing, milling, sharing) communicates all detail to manager, and Writing Shift Report,
Personal Attributes
DATE OF BIRTH : 14th April, 1979
MARITAL STATUS : Single
NATIONALITY : Indian
Imanel C. Rebello
PRAVINBHAI SHANTILAL PARMAR said,
November 17, 2009 @ 5:17 pm
Dear sir,
I AM FITTER UTILITY & MAINTENANCE OPERATOR.
NAME:PRAVINBHAI SHANTILAL PARMAR
AT/PO: KARKHADI ,NEAR VAV, TA:PADRA,DI:VADODARA,
GUJARAT,INDIA, PIN CODE :391450
NAME: PRAVINBHAI.S.PARMAR
CONTACT NO: 9978786138
Inbox (113)
EMAILID:pravinparmar2067@yahoo.com
PASSPORT NO: G-4336365
DATE OF BIRTH: 01/06/1977
MARITAL STATUS: MARRIED
NATIONALITY: INDIAN
LANGUAGESKNOW:GUJARATI,HINDI,ENGLISH
EDUCATION QUALIFICATION:
QUALIFICATION
BOARD
PASSING CLASS
PASSING YEAR
S.S.C
G.S.E.B
FIRST CLASS
1993
I.T.I
MOBHA,VAKAL
FIRST CLASS
1994/96
EXPERIENCE: Presently Working for PHILIPS ELECTRONICS LIMITED SINCE APRIL-1996
WORK LOCATION: UTILITY & PLANT MAINTENANCE (COOMAN DEPARTMENT)
Role & Responsibility:
Material Inventory Control.
Involve in charting out planning and Maintenance schedules for since project stage
Development activities & implement energy efficient retrofits.
TROUBLE SHOOT AND MAINTENANCE OF FOLLOWING EQUIPMENTS:
Air Compressors (screw & reciprocating type)
Blower (centrifugal & twin lobe )
Water pumps (centrifugal & submersible )
Cooling tower (natural draft & induced draught )
Flat belt Conveying system
Air handling units
Batch house Equipment:Elevator,Batch mixier,Sand driyer,Hoist
Water system:Raw water,Soft water,R.o.water,D.m.water
D.G.sets-Disel & Natural Gas fired
Storage,Contral & Supply:F.O/LDO/HSD/N.G/LPG/SO2/N2/O2/H2/AG+N2.
Material Handling Equipments: Pallet truck, Stackers.
Chilling Plants (operation)(Conventional Compressor type)
Vapour Absorption m/c (N.G.Fired type).
DATE:
(PRAVIN.S.PARMAR )